行業資訊

濟南路面機械設備降低維修頻率要如何做？

來源：http://m.id888.com.cn/ 日期：2022-04-02

　　路面機械設備在施工環境下工作非常的頻繁，這也表明如果使用時間長了應該會出現各種問題，隨著而來的便是維修頻率的增加，那么濟南路面機械設備降低維修頻率要如何做呢？

　　Road machinery and equipment work very frequently in the construction environment, which also shows that if the use of a long time should appear all kinds of problems, with the increase of maintenance frequency, then ji 'nan road machinery and equipment to reduce the maintenance frequency to do?

　　在購買到濟南路面機械設備之后，操作人員應接受生產廠家的培訓和領導，對機器的結構和性能有充分的了解，并獲得一定的操作和維修經驗后再操作機器。生產廠家提供的產品使用保護說明書是操作人員操作設備的必備資料，操作機器前，應該先閱讀使用保護說明書，并按說明書要求進行操作和維護。

　　After purchasing jinan road machinery and equipment, operators should accept the training and leadership of the manufacturer, have a full understanding of the structure and performance of the machine, and obtain certain operation and maintenance experience before operating the machine. The product protection manual provided by the manufacturer is the necessary information for the operator to operate the equipment. Before operating the machine, the operator should read the protection manual and operate and maintain the equipment according to the requirements of the manual.

　　注意磨合期的工作量。一般來說，磨合期的工作量不應超過額定工作量的80%。應調配適當?shù)墓ぷ髁?，防止機器長時間連續運轉而造成過熱現象。注意經常檢查各儀表的策動，如有異常應及時停機排除，在未查明原因、故障未排除前終止運行。

　　Pay attention to the workload during the run-in period. Generally speaking, the workload in the run-in period should not exceed 80% of the rated workload. Appropriate workload should be allocated to prevent overheating caused by continuous operation of the machine for a long time. Pay attention to check the operation of each instrument frequently. If there is any abnormality, stop the machine in time to eliminate it, and terminate the operation before finding out the cause and troubleshooting.

　　注意經常檢查潤滑油、液壓油、冷卻液、制動液、燃油（水）的液位和質量，注意檢查整機的密封性能。檢查時發現缺油缺水過多，應分析原因。同時，應加強各潤滑點的潤滑。建議在磨合期內，每班潤滑點加潤滑脂（特殊要求除外）。

　　Check the liquid level and quality of lubricating oil, hydraulic oil, coolant, brake fluid and fuel (water) regularly, and check the sealing performance of the whole machine. When the inspection found that lack of oil and water too much, should analyze the cause. At the same time, the lubrication of each lubrication point should be strengthened. It is recommended to add grease to the lubrication point of each shift during the running-in period (except for special requirements).

　　保持濟南路面機械設備清潔，及時調整和緊固松動的零件，防止因松動而磨損或丟失零件。磨合期停止時，應強制維修，并做好檢查和調整工作。同時，注意換油。

　　Keep ji 'nan road machinery and equipment machine clean, timely adjustment and fastening loose parts, to prevent wear or loss of parts due to loosening. When the run-in period stops, maintenance should be compulsory, and inspection and adjustment work should be done. Also, pay attention to oil change.

　　路面機械設備在磨合期的使用和維護要求可以概括為：加強培訓、減輕負荷、注意檢查、加強潤滑。只要注意并落實機械在磨合期的維護保養，就會減少早期故障的發生，延長使用壽命，提高工作效率，機器會給你帶來更多的好處。

　　The use and maintenance requirements of road machinery and equipment in the run-in period can be summarized as: strengthening training, reducing load, paying attention to inspection and strengthening lubrication. As long as you pay attention to and implement the maintenance of machinery in the run-in period, it will reduce the occurrence of early failures, prolong service life, improve work efficiency, the machine will bring you more benefits.

　　總歸而言便是平常使用設備工作，需要對其進行保養，才能慢慢降低維修頻率，畢竟維修次數多了機器的使用壽命會相應的降低。那么更多內容您就來我們網站http://m.id888.com.cn咨詢吧。

　　In general, it is the ordinary use of equipment work, the need to maintain it, in order to slowly reduce the frequency of maintenance, after all, the number of maintenance of the machine will be reduced accordingly. So more content you come to our website http://m.id888.com.cn consultation.

上一條：高速公路路面施工為什么多數使用瀝青材料？

下一條：怎么選到靠譜的濟南瀝青生產廠家？